Paxar 610, User Manual

Page: 37 / 109

Users Manual - 610 / 611 / 612 Printers 3. Setting Supply Options
•
35
2. Press Enter / Pause . You will see the current setting, for example:
Enter knife adj
[-300/300]: +0
3. Press
Í or Î to change the cut position. Pressing Í decreases the value (moves
the cut down); Î increases it (moves the cut up).
Press
Enter / Pause when the number you need appears. Press Escape / Clear to exit to
the Setup menu.
Supply Type
You can print on aperture, black mark, die cut, or continuous supplies. You have to tell the
printer which supplies you are using.
__________
If you are using edge aperture supplies,
use the die cut setting. If you are using
center aperture supplies, use the aperture setting.
__________
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
1. Press
Í or Î until you see
SUPPLY
Å Supply Type Æ
2. Press Enter / Pause to set the supply type option. You will see the current setting, for
example:
SUPPLY TYPE
Å Black Mark Æ
3. Press
Í or Î to see the other options. After you display the option you want, press
Enter / Pause . Press Escape / Clear twice to exit to the Main menu.
Note: Select “Continuous” only for the 612 printer. The 612 printer does not
support indexed supplies.