Paxar 610, User Manual

Page: 31 / 109

Users Manual - 610 / 611 / 612 Printers 3. Setting Supply Options
•
29
3. Setting Supply Options
This chapter explains how to select a ribbon, separators, feed mode, print position, supply
position, margin position, cut position, supply type, speed, and backfeed.
You may need to set supply options when you change supplies. The options are listed in
the table below.
Option Choices Default
Ribbon No / Yes / High Energy Yes
Separators No / Yes / Long No
Feed Mode Continuous / On-Demand Continuous
Print Position -99 to +99 0
Supply Position -300 to +300 0
Margin Position -99 to +99 0
Cut Position -300 to +300 0
Supply Type Aperture / Die Cut / Black Mark /
Continuous Die Cut
Speed 2.5 / 4.0 / 6.0 / 8.0 / 10.0 / Default Default
Backfeed Off / On / Extended Off
Verifier Disabled / Enabled Disabled
To exit an option without changing the setting, press Escape / Clear .
Ribbon
You have to tell the printer if your supplies require a ribbon. To change the setting, from
the Main Menu, select Setup, then Supply. Then, follow these steps.
1. Press
Í
or
Î
until you see
SUPPLY
Å Ribbon Æ
2. Press Enter / Pause to set the ribbon option. You will see the current setting, for
example: