Paxar 610, User Manual

Page: 35 / 109

Users Manual - 610 / 611 / 612 Printers 3. Setting Supply Options
•
33
To change the setting, from the Main Menu, select Setup, then Supply, then Positioning.
Then, follow these steps.
1. Press
Í
or
Î
until you see
Positioning
Å
Supply Pos
Æ
2. Press
Enter / Pause . You will see the current setting, for example:
Enter supply pos
[-300/300]: +0
3. Press
Í or Î to change the supply position. Pressing Í decreases the value (feeds
less supply); Î increases it (feeds more supply).
4. Press
Enter / Pause when the number you need appears. Press Escape / Clear twice
to exit to the Main menu.
Margin Position
This function adjusts where the format prints horizontally on the supply. The adjustments
are in dots (0.0033 inch), which is the smallest measurement the printer recognizes.
The width of the print area depends on your supply size. Maximum width is four inches.
When you move the image to the right or left on the supply, avoid moving the image too
close to either edge, because it may not print.
Print too far to the left. Print too far to the right.