Paul thermos 200, Operating Instructions Manual

Page: 19 / 72

Status 14.07.09
We reserve the right to make
changes favouring technical
progress.
User Guidance
Automatic Control Unit
thermos 200 / 300 DC
®
WÄRMERÜCKGEWINNUNG
© Paul Wärmerückgewinnung GmbH • August-Horch-Straße 7 • 08141 Reinsdorf • Deutschland
Tel: +49(0)375-303505-0 • Fax: +49(0)375-303505-55 • E-Mail: info@paul-lueftung.de • Internet: www.paul-lueftung.de
7
1.2.6.1 Menu Settings – Edit Programs 5.0
A program can be used to store a specific ventilation step for any quarter of any hour during a day. The
ventilation power steps are:
zero
→ No ventilation
min → Minimum ventilation
normal → Normal ventilation
max → Maximum ventilation
A system is generally designed and dimensioned for normal ventilation. So the minimum or zero steps
mean that there is less air exchange than assumed in the system design. On the one hand, there are
certain hygienic aspects – on the other, a reduced flow rate in association with a duct heater reduces heat
output.
Therefore, normal ventilation should be used most of the day.
Press TA3 to TA5 to select the desired time.
TA5 advances the cursor by 15 minutes, TA4 by one hour. TA3 sets the cursor back by one hour.
Use TA2 to assign the active time period to a ventilation step. You have the choice between zero, min,
normal, and max.
Edit program:01 5.0
←
00:00
→
min
00:15 min
00:30 normal
00:45 max (+)
→
+1/4h +1h -1h
TA1
TA2
TA3 TA4 TA5