manualshive.com logo in svg

Paul thermos 200, Operating Instructions Manual

Share
Download
Paul thermos 200 Operating Instructions Manual Download Page 15

Status 14.07.09 

 
We reserve the right to make 
changes favouring technical 
progress.

 

User Guidance 

Automatic Control Unit 

thermos 200 / 300 DC 

®

WÄRMERÜCKGEWINNUNG

 

© Paul Wärmerückgewinnung GmbH • August-Horch-Straße 7 • 08141 Reinsdorf • Deutschland  

Tel: +49(0)375-303505-0 • Fax: +49(0)375-303505-55  • E-Mail: [email protected] • Internet: www.paul-lueftung.de 

 

3

1.2 

Menu - Settings 0 

 
Scroll through the menu items with TA4 and TA5 (up/down arrows), press TA2 to select an item. 
Press TA1 to return to the basic menu. 
The pre-selected function is “System Off”. 

 

 

1.2.1 

Menu - Settings 0 - System Off 

 
The control system is switched off, none of the sensors, modules and fans is monitored or controlled. 
Reduced power input if the “standby” option is available. Press the TA4 button to switch on the control 
system, which will start to run the auto program.

 

 

 

Settings 0        

System setup 

>Unit OFF<  

 

 

 

←

 

Enable 
Filter change 
Temperatures 
Programs/day 
Programs 
Date/time 

   ok 

Night reduction 
Info 

 

↓

 

      

↑

 

TA1

TA2

TA3

TA4 

TA5 

 
 

Unit is OFF 

(Standby) 

 
 
 

switch on

 

TA1

TA2

TA3

TA4 

TA5 

Summary of Contents for thermos 200









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands