Configuring Model 6081RC H.110 parameters
13
Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide
2 • Physical layer configuration
Figure 7. H110 Channel Configuration page
2. Type a description for the channel (in
figure 7
, the description would be Location1). This description will
be associated with a PPP channel defined later in this procedure).
3. Click on the
Add Channel
button to create the new channel.
Figure 8. H.110 Channel Configuration window
4. Click on the channel number hyperlink in the
Channel
column (in
figure 8
, you would click on
channel 1) to refresh the page and cause information about the newly created channel to appear. Channels
will be numbered (starting with 1) in the order they are entered.
Note
If you want to delete a channel configuration from the listing, click
the
Delete
check box for the channel you want removed, then click
the
Delete Channel
(s) button.
Note
If a bridged or routed PPP link is active on this channel, deactivate
the PPP link before deleting the H.110 channel.
Defining H.110 ports, timeslots, and direction
1. Click on the channel number hyperlink in the
H.110 Channel Configuration
page to go to the H.110 Set-
tings channel timeslot mapping page (see
figure 9
). The page displays the channel number, description,
and places to add a timeslot map. This page provides several buttons for navigating through stored bridge
configuration:
– The
Refresh Page
button forces the 6081RC to display changes made since the previous refresh cycle
– The
First Channel
button displays the configuration for the first channel in the H110 Channel Config-
uration page listing of channels (see
figure 9
).
