Basic G.SHDSL and T1/E1 test modes
78
Model 3096RC T-DAC Getting Started Guide
5 • Troubleshooting and maintenance
To turn off the loop mode, use the
Test Mode
drop down menu, select
Off
and click on the
Submit
button.
The port field should be highlighted in green when the port returns to data mode.
Line loop (LineLoop)
The line loop, initiated from the 3096RC, tests the DSL link between a 3096RC DSL port and the CPE. When
a DSL port is placed on line loop, data transmitted by the CPE is looped at the 3096RC port (see
figure 58
).
Figure 58. Line Loopback
To activate line loop on a DSL port, do the following:
1. Go to the G.SHDSL page and find the port to be placed under loopback.
2. Locate the
Test Mode
drop down menu and select
LineLoop
.
3. Go to the bottom of the screen and click on the
Submit
button. The port selected for line loop will be
highlighted in blue.
To turn off the loop mode, use the
Test Mode
drop down menu, select
Off
and click on the
Submit
button.
The DSL port field should be highlighted in green when the port returns to data mode.
3096RC
DSL
3086
Ethernet
TDM
