Using a browser to complete Model 3096RC configuration
57
Model 3096RC T-DAC Getting Started Guide
3 • Configuring the T-DAC for operation
Configuring Patton G.SHDSL CPE device remotely via the Model 3096RC
Once a G.SHDSL link is established between the 3096RC port and a Patton Customer Premise Equipment
(CPE) G.SHDSL device, (such as the Model 3086 G.SHDSL IAD) you may use the 3096RC Web Manage-
ment pages to remotely configure DSL port parameters on the CPE device. The following DSL port parame-
ters may be configured remotely:
•
Serial Payload Rate
•
Annex Type
•
PCM Mode
•
Interface Type
Do the following to configure the G.SHDSL port parameters on the Patton CPE device:
1. On the 3096RC home page click the DSL hyperlink to display the G.SHDSL Port Configuration page.
2. Scroll to the table row for the port which connects to the Patton CPE device, and click the port number
hyperlink to display the G.SHDSL Port # Details page.
