10
Compliance Information
Radio
and TV
Interference
The Model 3096RC generates and uses radio frequency energy, and if not installed and used properly—that is,
in strict accordance with the manufacturer's instructions—may cause interference to radio and television
reception. The Model 3096RC has been tested and found to comply with the limits for a Class A computing
device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to pro-
vide reasonable protection from such interference in a commercial installation. However, there is no guarantee
that interference will not occur in a particular installation. If the Model 3096RC causes interference to radio or
television reception, which can be determined by disconnecting the cables, try to correct the interference by
one or more of the following measures: moving the computing equipment away from the receiver, re-orienting
the receiving antenna, and/or plugging the receiving equipment into a different AC outlet (such that the com-
puting equipment and receiver are on different branches).
Interference can also be reduced by installing an optional clamp-on ferrite (Patton P/N 0816-13) on the DSL
cable, within 12 inches (30 cm) of the DSL connector (see figure 1)
