Using a browser to complete Model 3096RC configuration
58
Model 3096RC T-DAC Getting Started Guide
3 • Configuring the T-DAC for operation
3. Click the
Change Config
button to display the configurable parameters for the Patton CPE device on the
right-hand side of the page (see below).
4. Use the drop-down menus to set the configurable parameters to your desired values.
5. Click the
Submit
button to record your changes on the remote Patton CPE. You will automatically return
to the G.SHDSL Port # Details page.
You have now completed the procedure to remotely configure one Patton G.SHDSL CPE device via the Model
3096RC. To activate additional Patton CPE devices, repeat the above procedure for each device you wish to
configure.
Configuring line settings and signaling for E1
Accessing the Line Interface Settings
1. On the 3096RC Configuration Menu, click the T1/E1 Link hyperlink to open the
T1/E1 LINK ACTIV-
ITY OVERVIEW
page (see
figure 37
).
Figure 37. T1/E1 Link Activity Overview page
2. View Link 1 corresponds to the first WAN circuit on the T-DAC. To the right of View Links 1-4
click the
View Links... hyperlink to open the
T1/E1 LINK ACTIVITY PORTS 1 – 4
page (see
figure 38
).
