Initial configuration through the RS-232 control port
38
Model 3096RC T-DAC Getting Started Guide
3 • Configuring the T-DAC for operation
Setting up the HyperTerminal (or similar program) session
Do the following:
1. At your PC, find the file
HYPERTRM.EXE
.
Open a HyperTerminal session by double-clicking on the file
name.
Figure 15. Connection Description window
2. Type a connection name
(e.g., 3096RC Config), select an icon, then click
OK
(
figure 16
).
Figure 16. Connect To window
3. On the Connect To window (
figure 16
), set Connect using: to one of the options named Direct to ComX
(where the “X” refers to the number identifying the RS-232 serial port on the PC). In the following proce-
dure, Com1 will be the used as the port identifier.
4. Click
OK
.
5. The COM1 Properties window displays.
