Using a browser to complete Model 3096RC configuration
45
Model 3096RC T-DAC Getting Started Guide
3 • Configuring the T-DAC for operation
2. Click the Routing Info hyperlink to open the
IP Routing Information
page (
figure 24
).
Figure 24. IP Routing Information Page
3. The existing route you see in the table is the LAN IP address you assigned to the 3096RC during initial
configuration through the RS-232 control port, earlier in this chapter.
4. To enter the default gateway, use the first
Add a route line
. The Destination shall remain 0.0.0.0, and there
is no mask to enter.
5. In the Gateway box, type your default gateway IP address for the 3096RC.
6. Click the
Add Route
button to save your configuration.
Figure 25. IP Routing Information window
7. The route which you already see in the table appeared upon the configuration of the LAN IP address.
