3 • Configuring the DACS for operation
Model 3095 mDSL DACS Getting Started Guide
32
Introduction
Introduction
This chapter contains the following procedures for configuring the Model 3095 DACS for operation:
•
“Configuration prerequisites”—lists the items you need to have on hand before configuring the DACS.
•
“Initial Configuration through the RS-232 Control Port” on page 33—describes setting up the 3095’s LAN
IP address and netmask parameters.
•
“Using a Web browser to complete Model 3095 configuration” on page 36—describes the process to com-
plete the software installation parameters—that is, to bring it on-line. The steps are:
-
Setting Static Connections with DS0 Mapping
-
Setting the System Clock Source
-
mDSL Modem Activation
-
IP Default Gateway
-
T1/E1 WAN Links
•
“Saving your configuration” on page 47—tells you how to save the configuration settings.
•
“Completing the installation” on page 49—describes testing the 3095 DACS to verify that it is fully opera-
tional.
Configuration prerequisites
You will need the following to configure the 3095 DACS:
•
A PC that includes the following:
-
RS-232/V.24 serial port
-
VT-100 terminal program, e.g., HyperTerminal
-
Ethernet port
-
Web browser (e.g., Netscape Communicator or Microsoft Internet Explorer)
•
You will need the following information to configure the Model 3095:
-
The IP address and subnet mask for the 3095’s Ethernet port
-
The IP address of the default gateway
-
The 3095 mDSL port number to which each customer premises equipment (CPE) mDSL modem will be
connecting
-
The data rate at which each CPE mDSL will be operating
-
The final destination of the CPE's mDSL modem connection
•
If you are using a T1 WAN line, you will need the following information from the telephone company
(central office):
-
Line Type: either ESF or D4
-
Line Coding: either B8ZS or AMI
Summary of Contents for 3095
Page 6: ...Contents Model 3095 mDSL DACS Getting Started Guide 6...
Page 12: ...Model 3095 mDSL DACS Getting Started Guide 12...
Page 69: ...69 Appendix A Network Ports RJ 21X connector pin out Chapter contents Introduction 70...
Page 73: ...73 Appendix B WAN Network Module connector pin out Chapter contents Introduction 74...