manualshive.com logo in svg

Patton electronics 3095, Getting Started Manual

Share
Download
Patton electronics 3095 Getting Started Manual Download Page 21

21

Chapter 2

Hardware installation

Chapter contents

Introduction ..........................................................................................................................................................22
Unpacking the Model 3095 DACS .......................................................................................................................22
DACS chassis installation ......................................................................................................................................22
Cable installation...................................................................................................................................................23

Installing the power cables—AC Power Supply ...............................................................................................23
Installing the power cables—DC Power Supply  ..............................................................................................24
Grounding the Model 3095—AC and DC Power Supplies  ............................................................................25
Connecting the Ethernet ports  ........................................................................................................................26

Connecting the 10/100Base-T Ethernet port to an Ethernet switch or hub ...............................................26

Connecting the 10/100Base-T Ethernet port to an Ethernet-capable workstation or PC .................................27
Connecting the EIA-561 RS-232 configuration port (DCE configured)  .........................................................27
Connecting to the T1/E1 WAN ports  ............................................................................................................27
Connecting the mDSL Ports ...........................................................................................................................28

Completing the hardware installation ....................................................................................................................28

Summary of Contents for 3095













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands