![background image](http://html2.mh-extra.com/html/patton-electronics/3095/3095_getting-started-manual_4061180034.webp)
3 • Configuring the DACS for operation
Model 3095 mDSL DACS Getting Started Guide
34
Initial Configuration through the RS-232 Control Port
Figure 13. Connect To window
3. On the Connect To window (see figure 13), set Connect using: to one of the options named Direct to ComX
(where the "X" refers to the number identifying the RS-232 serial port on the PC). In the following proce-
dure, Com1 will be the used as the port identifier.
4. Click on
OK
.
5. The COM1 Properties window displays.
6. Configure your COM port settings as shown in figure 14, then click
OK
.
Figure 14. COM1 Properties window
7. Click on the
File
menu, then select
Properties
.
Summary of Contents for 3095
Page 6: ...Contents Model 3095 mDSL DACS Getting Started Guide 6...
Page 12: ...Model 3095 mDSL DACS Getting Started Guide 12...
Page 69: ...69 Appendix A Network Ports RJ 21X connector pin out Chapter contents Introduction 70...
Page 73: ...73 Appendix B WAN Network Module connector pin out Chapter contents Introduction 74...