Initial Configuration through the RS-232 Control Port
35
Model 3095 mDSL DACS Getting Started Guide
3 • Configuring the DACS for operation
8. Configure the settings for Function, arrow and ctrl keys act as to Terminal keys as shown in figure 15, then
click
OK
.
Figure 15. Terminal keys configuration
9. Connect the male end of the 3095 DACS’ power cables to the power outlets.
10. On your HyperTerminal connection window, boot up information will display, eventually followed by a
login request window resembling that shown in figure 16.
Figure 16. Login window
11. For the user name, type
superuser
.
12. For the password, type
superuser
; the
TOP LEVEL MANAGEMENT
window then appears (see
figure 17).
Summary of Contents for 3095
Page 6: ...Contents Model 3095 mDSL DACS Getting Started Guide 6...
Page 12: ...Model 3095 mDSL DACS Getting Started Guide 12...
Page 69: ...69 Appendix A Network Ports RJ 21X connector pin out Chapter contents Introduction 70...
Page 73: ...73 Appendix B WAN Network Module connector pin out Chapter contents Introduction 74...
