Patton electronics 3095, Administrator'S Reference Manual

Page: 59 / 200

Configuring the System Clock Settings 57
mDSL DACS Administrators’ Reference Guide 8 • System Clocking
• wan-8(8)—WAN port #8 is the clock source
• wan-9(9)—WAN port #9 is the clock source
• wan-10(10)—WAN port #10 is the clock source
• wan-11(11)—WAN port #11 is the clock source
• wan-12(12)—WAN port #12 is the clock source
• wan-13(13)—WAN port #13 is the clock source
• wan-14(14)—WAN port #14 is the clock source
• wan-15(15)—WAN port #15 is the clock source
• wan-16(16)—WAN port #16 is the clock source
• mdsl-1(51)—mDSL port #1 is the clock source
• mdsl-2(52)—mDSL port #2 is the clock source
• mdsl-3(53)—mDSL port #3 is the clock source
• mdsl-4(54)—mDSL port #4 is the clock source
• mdsl-5(55)—mDSL port #5 is the clock source
• mdsl-6(56)—mDSL port #6 is the clock source
• mdsl-7(57)—mDSL port #7 is the clock source
• mdsl-8(58)—mDSL port #8 is the clock source
• mdsl-9(59)—mDSL port #9 is the clock source
• mdsl-10(60)—mDSL port #10 is the clock source
• mdsl-11(61)—mDSL port #11 is the clock source
• mdsl-12(62)—mDSL port #12 is the clock source
• mdsl-13(63)—mDSL port #13 is the clock source
• mdsl-14(64)—mDSL port #14 is the clock source
• mdsl-15(65)—mDSL port #15 is the clock source
• mdsl-16(66)—mDSL port #16 is the clock source
• internal(200)— The internal free-running oscillator is the clock source.
• external(300)—The external clock source connected to the 3-position terminal block on the rear of the
Model 3095 is the clock source.
Fallback Reference (daxClockFallbackRef)
The fallback reference enables the configuration of a back-up clock reference should the main reference fail.
The
Main Reference
and
Fallback Reference
parameters have the same selections for system clock. Make sure
you choose different clock sources for the Main Reference and Fallback Reference. The fallback reference set-
tings are the same as those described in section “Main Reference (daxClockMainRef )” on page 56.