Patton electronics 3095, Administrator'S Reference Manual

Page: 170 / 200

21 • T1/E1 Link mDSL DACS Administrators’ Reference Guide
168 WAN Circuit Configuration—Modify
Send Code (dsx1SendCode)
This variable indicates what type of code is being sent across the DS1 interface by the device. The values mean:
• dsx1SendNoCode—Sending looped or normal data
• dsx1SendLineCode—Sending a request for a line loopback
• dsx1SendPayloadCode—Sending a request for a payload loopback
• dsx1SendResetCode—Sending a loopback termination request
• dsx1SendQRS—Sending a Quasi-Random Signal (QRS) test pattern
• dsx1Send511Pattern—Sending a 511 bit fixed test pattern
• dsx1Send3in24Pattern—Sending a fixed test pattern of 3 bits set in 24
• dsx1SendOtherTestPattern—Sending a test pattern other than those described by this object.
Error Injection (linkInjectError)
Force an output error to see if the other end detects it
• noErrorInjection(0)
• injectCRCerrorBurst(1)
• injectLineErrorBurst(2)
Yellow Alarm Severity ()
This reference is identical to the reference on the Alarms page in the 3095 Configuration Menu . The configu-
ration may be changed here or in the
Alarms
page.
• ignore(0)
• minor(1)
• major(2)
• minorSelfClearing(3)
• majorSelfClearing(4)\
Red Alarm Severity ()
This reference is identical to the reference on the Alarms page in the 3095 Configuration Menu . The configu-
ration may be changed here or in the
Alarms
page.
• ignore(0)
• minor(1)
• major(2)
• minorSelfClearing(3)
• majorSelfClearing(4)