Patton electronics 3095, Administrator'S Reference Manual, Page: 166 / 200

21 • T1/E1 Link mDSL DACS Administrators’ Reference Guide
164 Line Status—Configuration
Far End Loss Of Multiframe Failure
The Far End Loss Of Multiframe failure is declared when bit 2 of TS16 of frame 0 is received set to one on two
consecutive occasions. The Far End Loss Of Multiframe failure is cleared when bit 2 of TS16 of frame 0 is
received set to zero. The Far End Loss Of Multiframe failure can only be declared for E1 links operating in
Channel Associated Signalling mode.
Line Status—Configuration
Clicking on the
Line Status—Configuration
link in the T1/E1 Link Activity Ports window displays the
WAN
Circuit Configuratio Link window (see figure 53). This window contains general information about the WAN
interface, including the type of line (D4 Superframe or Extended Superframe), and kind of line coding (B8ZS
or AMI). To modify the WAN circuit configuration, click on the
Modify Configuration… link. For more infor-
mation about modifying WAN circuit settings, refer to “WAN Circuit Configuration—Modify” on page 165.
Figure 53. WAN Circuit Configuration Link window
Note Click on the Modify link to change the settings of any of the follow-
ing parameters (see “WAN Circuit Configuration—Modify” on
page 165).
The
WAN Circuit Configuration
window also displays the amount of time that has passed and the number of
intervals passed during which valid data was collected.
Time Elapsed (dsx1TimeElapsed)
The number of seconds that have elapsed since the beginning of the current error-measurement period.