- 5 -
PATON
ProMIG
DC MMA/TIG/MIG/MAG
TABLE OF CONTENTS
INTRODUCTION
DECLARATION OF CONFORMITY
1 GENERAL INFORMATION
8
2. Start up of the device
13
2.1 Intended use
13
2.2 Placement requirements
14
2.3 Connecting to the power grid
15
2.4 Connecting the power plug
15
3. MANUAL METAL ARC (SMAW) WELDING
15
3.1 Welding process cycle
–
MMA
16
3.2 "HOT-START" Function
17
3.3 "ARC-FORCE" Function
17
3.4 "ANTI-STICK" Function
18
3.5 Current-voltage characteristic slope control function
19
3.6 Short-arc welding function
19
3.7 No-load voltage reduction function
19
3.8 Pulsed welding function
19
4. TUNGSTEN INERT GAS (GTAW) WELDING
21
4.1.1 Welding process cycle - TIG-LIFT
22
4.1.2 TIG-LIFT arc striking function
22
4.1.3 Welding process cycle - TIG-2T
23
4.1.4 Button function on the TIG-2T torch
24
4.1.5 Welding process cycle - TIG-4T
25
4.1.6 Button function on the TIG-4T torch
26
4.2 Precurrent function (pilot arc)
27
4.3 Crater filling current function
27
4.4 Current Ramp-Up Function
27
4.5 Current Ramp-Down Function
27
4.6 Pulse current welding function
27
4.7 Shielding gas pre-flow function
28
4.8 Shielding gas post-flow function
28
5. METAL INERT GAS / METAL ACTIVE GAS ARC WELDING (MIG/MAG)
29
5.1 Welding process cycle - MIG/MAG
31
5.1.1 Button function on torch - 2T
31
5.2 Welding process cycle - MIG/MAG - 4T
32
5.2.1 Button function on torch - 4T and alt.4T
32
5.3 Inductance function
33
5.4 Shielding gas pre-flow function
34
Summary of Contents for PROMIG-160
Page 1: ...j...
