Passap ELECTRONIC 8000, Operating Manual

Page: 46 / 266

KNITTING INSTRUCTIONS
The meaning of the knitting i nstructions
RAC KI NG >>>
RAC KI N G <<<
RAC KI NG <<<
1
WITHOUT YARN
NEE DLES AN D JAC KS
ACCORDING TO
DIAGRAM
2 ROWS PREV.
PAT TERN
44
This display means that the racking handle
must be turned in the direction of the arrow
(Arrow to the right = clockwise, arrow to the
left = counterclockwise)
N ote : The display always refers to the turning
direction of the lever, not to the direction to
which the needle bed is moved .
The number in this display indicates the
number of handle turns which have to be
made. 1 /2 means half a handle turn (e.g.
from down to up).
This instruction appears when the zero rows
have to be knitted. Move the cam box into the
color changer in order to expel the feeder that
was in the cam box. To be able to carry out 2
zero rows without feeder, do not take a new
feeder into the cam box.
To avoid any other feeder from being taken
over by the cam box, set the color changer
to the neutral position by pressing the
button underneath the color changer.
Please refer to page 1 9
ft.
This display appears together with the one
mentioned above. It means that, depending
on the TECHNIQUE you wish to knit, all or
only some needles and jacks have to be
brought into work position. Pages 1 00 to 145
contain a description of all techniques stored
permanently in the memory, including the
corresponding needle diagrams.
This display informs you, when changing to a
new pattern sector, that another 2 rows of the
previous pattern have to be knitted while
preparations for the new pattern are already
being made. Press GO to continue knitting.