Passap ELECTRONIC 8000, Operating Manual

Page: 182 / 266

Error messages
4080, 4081 ,
4082, 4083
41 23
41 40
41 73
41 81
1 52
MODULE ERROR
The defragmentation has not been possible. Unplug the
plug from the operating unit and plug it in aga i n .
If the same error message appears again, replace your
module by another.
NOT ENOUGH SPACE
There is not enough space left in the module for the pat­
tern you want to programme or to save. Delete some pat­
terns and defragment the module. (See page 99)
NO DATA TRANSFERRED
The E 8000 has not received any data from the PC. Have
you pressed a random key on the PC ? If yes check whe­
ther the connecting cable is plugged in properly.
WRONG CAM BOX POS.
The carriage was still moving while you pressed a key
that is not active in this situat i on .
C HECK MOTOR
The motor i s switched off or the cable of the motor i s not
plugged in.
If this is not the case the fuse might be broken. Unplug the
cable goint to the mains. There you wil l find a small dra­
wer, that can be pulled out. Nearer to the motor is the ac­
tive fuse, that might be broken. Nearer to you is a reserve
fuse. Push it sideways out of its holding and put it in the
place of the broken fuse.