Passap ELECTRONIC 8000, Operating Manual

Page: 153 / 266

Error messages
4059
4060
4061
4062, 4063,
4064
4065
4066
4067
4068, 4069,
4072
N R NOT EXISTING
There are n o numbers existing that could be displayed for
this HELP function.
v EDGES
The numbers that you have entered for the knitting width
on the front bed are not possible, alter them.
A
EDGES
The numbers you have entered for the knitting width on
the back bed are nor possible, alter them.
EDGES MOTOR
You have tried to enter a length of the motor travel that is
shorter than your knitting width.
RC NOT VALID
When changing the row counter you can only enter even
numbers .
KEY NOT ACTIVE
When the cam box is in this position the key you pressed
is not active.
SAVE ERROR
Nothing has been saved. The reason might be that the
module is not properly in place.
DATA NOT EXISTI NG
You have tried to save, to program or to delete a
technique or a pattern whose number does not exist at the
indicated origin.
1 51