Passap ELECTRONIC 8000, Operating Manual, Page: 91 / 266

Actions d u ring kn itting
Programm ing a single stop
If you would like to program a single stop during knitting, press the RWS key and
move the cursor to the second input field.
RWS
ROW COUNTER t2t
STOP AT
ENT
•o•
I n the second input field, you ca n type a random row number
he ENT key , you are back to
ou pressed the RWS button.
(max . 9999). If you then press t
the position you were in when y
In the last row before the stop, t
he row counter display will
show ">I"
=
Stop at the end of t he row. When the cam box has
ollowin dis Ia a stopped, the f g p y ppears:
PROGRAMMED STOP
This stop can also take place in a different pattern sector as
the one in which the programming of the stop is taking p l a c e .
Once the stop has been executed, you can enter a further
stop.
You can, however, never enter more than one stop at a time.
89