RP-330 Technical Manual
40
ESC L
[Name]
Select page mode
[Format]
ASCII
ESC
L
Hex
1B
4C
Decimal 27
76
[Description]
Switches from standard mode to page mode.
[Details]
·This command is enabled only when input at the beginning of a line in
standard mode.
·This command has no effect in page mode.
·After printing by
FF
is completed or by using
ESC S
, the printer returns to standard mode.
·This command sets the position where data is buffered to the position specified by
ESC T
within
the printing area defined by
ESC W
.
·This command is switches the setting for the following commands (in which the values can be
set independently in standard mode and page mode) to those for page mode.
①
Set right-side character spacing :
ESC SP, FS S
②
Select default line spacing :
ESC 2, ESC3
·Only valve settings is possible for the following commands in page
mode; these commands are not executed.
①
Turn 90
clockwise rotation mode on/off:
ESC V
②
Select justification:
ESC a
③
Turn upside-down printing mode on/off:
ESC {
④
Set left margin:
GS L
⑤
Set printable area width:
GS W
·The following command is ignored in page mode:
①
Execute test print:
GS W
·The following command is not available in page mode:
①
Print NV bit image :
FS p
②
Define NV bit image :
FS q
③
Print raster bit image :
GS v 0
·The printer returns to standard mode when power is turned on, the printer is reset, or
ESC @
is
used.
[Reference]
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS
＼
