RP-330 Technical Manual
67
①
When the starting position is set to the upper left or lower right of the
printing, the
vertical motion unit (
y
) is used.
②
When the starting position is set to the upper right or lower left of the printing
area, the
horizontal motion unit (
x
) is used.
·The horizontal and vertical motion unit are specified by
GS
P.
·The
GS P
command can change the horizontal (and vertical) motion unit.
However, the value cannot be less than the minimum horizontal movement
amount, and it
must be in even units of the minimum horizontal movement
amount.
[Reference]
ESC $
,
ESC T
,
ESC W
,
ESC
＼
,
GS $
,
GS P
GS ^
r t m
[Name]
Execute macro
[Format]
ASCII
GS
^
r
t
m
Hex
1D 5E
r
t
m
Decimal
29
94
r
t
m
[Range]
0
r
255
0
t
255
m=0,1
[Description]
Executes a macro.
·r specifies the number of times to execute the macro.
·t specifies the waiting time for executing the macro.
·m specifies macro executing mode.
When the LSB of m = 0:
The macro executes r times continuously at the interval specified by t.
When the LSB of m = 1:
After waiting for the period specified by t, the PAPER OUT LED indicators blink and the
printer waits for the FEED button to be pressed. After the
button is pressed, the printer
executes the macro once. The printer
repeats the operation r times.
[Details]
·The waiting time is t * 100 ms for every macro execution.
·If this command is received while a macro is being defined, the macro definition
is aborted
and the definition is cleared.
·If the macro is not defined or if r is 0, nothing is executed.
·When the macro is executed (m = 1), paper always cannot be fed by using the
FEED button.
[Reference]
GS :
