RP-330 Technical Manual
60
·The d indicates bit-image data. Data
(d)
specifies a bit printed to 1 and not printed to 0.
·The downloaded bit image definition is cleared when:
①
ESC@ is executed.
②
ESC & is executed.
③
FS q is executed.
④
Printer is reset or the power is turned off.
·The following figure shows the relationship between the downloaded bit
image and the printed data.
[Reference]
GS
＼
GS /
m
[Name]
Print down-loaded bit image
[Format]
ASCII
GS /
m
Hex
1D
2F
m
Decimal
29
47
m
[Range]
0
m
3,48
m
51
[Description]
Prints a downloaded bit image using the mode specified by
m
.
m selects a mode from the table below:
m
Mode
Vertical Dot Density
Horizontal Dot Density
0, 48
Normal
180 DPI
180 DPI
1, 49
Double-width
180 DPI
90 DPI
2, 50
Double-height
90 DPI
180 DPI
3, 51
Quadruple
90DPI
90 DPI
[dpi : dots per 25.4 mm {1”}]
[Details]
·This command is ignored if a downloaded bit image has not been defined.
·In standard mode, this command is effective only when the on data exists
in the print buffer.
·This command is not affected by print modes (emphasized, double-strike,
underline, or character size, white/black reverse printing), except for
