RP-330 Technical Manual
5
1.4 Paper Roll Supply Device
1) Supply method:
Drop-in paper roll
2) Near-end sensor:
a) Detection method:
Photo Reflector
b) Paper roll spool diameter:
Inside: 12mm(.47″)
Outside: 18mm(.71″)
c) Near-end adjustment:
Adjusting screw
d) Remaining amount:
Fixed position #1 (approximately 23mm(0.9″))
#2 (approximately 27mm(1.06″))
NOTE:
You can use a command to stop printing upon detection of a paper near-end.
1.5 Paper Specification
1) Paper type:
Specified thermal paper
2) Form:
Paper roll
3) Paper width:
(82.5mm paper width model)
82 ±0.5mm (3.23" ±0.02")
(80mm paper width model)
79.5 ±0.5mm (3.13" ±0.02")
(60mm paper width model)
59.5 ±0.5mm (2.34" ±0.02")
(58mm paper width model)
57.5 ±0.5mm (2.26" ±0.02")
4) Paper roll size:
Roll diameter : Maximum 83mm
Take-up paper roll width:
80 ± 0.5, 1.0mm(3.15"±0.020", 0.04")
5) Paper roll spool diameter: Inside:
12mm(.47")
Outside: 18mm(.71")
NOTE:
Paper must not be pasted to the paper roll spool.
