RP-330 Technical Manual
59
GS $
nL nH
[Name] Set absolute vertical print position in page made
[Format]
ASCII
GS $
nL nH
Hex
1D 24
nL nH
Decimal
29 36
nL nH
[Range]
0
nL
255
, 0
nH
255
[Description]
·Sets the absolute vertical print starting position for buffer character data
in page mode.
·This command sets the absolute print position to [ (
nL + nH
256)
(vertical or horizontal
motion unit)] inches.
·If the [ (
nL + nH
256)
(vertical or horizontal motion unit)] exceeds the
specified printing area, this command is ignored.
·The horizontal starting buffer position does not move.
·The reference starting position is that specified by
ESC T
.
·This command operates as follows, depending on the starting position of the printing area
specified by
ESC T
:
①
When the starting position is set to the upper left or lower right, this
command sets the absolute position in the vertical direction.
②
When the starting position is set to the upper right or lower left, this
command sets the absolute position in the horizontal direction.
·The horizontal and vertical motion units are specified by
GS P
.
·The
GS P
command can change the horizontal and vertical motion unit.
However, the value cannot be less than the minimum horizontal movement amount, and it
must be in even units of the minimum horizontal movement amount.
[Reference]
ESC $, ESC T, ESC W, ESC
＼
, GS
＼
, GS P
GS
x y
d1...d
(x
y
8)
[Name] Define downloaded bit image
[Format]
ASCII GS
x
y
d1
…
d
(
x
x
y
x 8)
Hex 1D 2A
x
y
d1
…
d
(
x
x
y
x 8)
Decimal 29
42
x
y
d1
…
d
(
x
x
y
x 8)
[Range]
1
x
255
1
y
48
x
x
y
1536
0
d
255
[Description]
Defines a downloaded bit image with the number of dots specified by
x
and
y
.
·
x
indicates the number of dots in the horizontal direction.
·
y
indicates he number of dots in the vertical direction.
[Details] ·The number of dots in the horizontal direction is
x
x
8, in the vertical
direction it is
y
x
8.
·If
x
x
y
is out of the specified range, this command is disabled.
