Partner RP- 310, Technical Manual, Page: 81 / 87

TITLE : RP-300/310
Page -80 -
When CODE93 (m=72) is used :
·The printer prints an HRI character (□ )as start character at the
beginning of the HRI character string.
·The printer prints an HRI character(□ )as a stop character at the end of
the HRI character string.
·The printer HRI characters (■ +an alphabetic character) as a control
character(<00>H to <1F>H and <7F>H):
Control character Control character
ASCⅡ Hex Decimal
HRI character
ASCⅡ Hex Decimal
HRI
character
NUL 00 0 ■ U DLE 10 16 ■ P
SOH 01 1 ■ A DC1 11 17 ■ Q
STX 02 2 ■ B DC2 12 18 ■ R
ETX 03 3 ■ C DC3 13 19 ■ S
EOT 04 4 ■ D DC4 14 20 ■ T
ENQ 05 5 ■ E NAK 15 21 ■ U
ACK 06 6 ■ F SYN 16 22 ■ V
BEL 07 7 ■ G ETB 17 23 ■ W
BS 08 8 ■ H CAN 18 24 ■ X
HT 09 9 ■ I EM 19 25 ■ Y
LF 0A 10 ■ J SUB 1A 26 ■ Z
VT 0B 11 ■ K ESC 1B 27 ■ A
FF 0C 12 ■ L FS 1C 28 ■ B
CR 0D 13 ■ M GS 1D 29 ■ C
SO 0E 14 ■ N RS 1E 30 ■ D
SI 0F 15 ■ 0 US 1F 31 ■ E
DEL 7F 127 ■ T
[Example] Printing GS k 72 7 67 111 100 101 13 57 51
When CODE 128 (m = 73) is used:
·Refer to Appendix J for the information of the CODE 128 bar code and
is
code table.
·When using the CODE 128 in this printer, take the following points into
account for data transmission:
① The top of the bar code data string must be code set selection
character (any of CODE A, CODE B or CODE C) which selects the
first code set.
② Special characters are defined by combining two characters