TITLE : RP-300/310
Page -68 -
[Details]
·This command is effective only of the beginning of a line.
·If this command is input in page made, the printer performs only internal
flag operations.
·This command does not affect printing in page made.
·If the setting exceeds the printable area, the maximum value of the
printable area is used.
·The horizontal and vertical motion units are specified by GS P. Changing
the horizontal or vertical motion unit does not affect the current left
margin.
·The horizontal motion unit (x) is used for calculating the left margin. The
calculated result is truncated to the minimum value of the mechanical
pitch.
[Default]
nL = 0, nH = 0
[Reference]
GS W, GS P
GS P
x y
[Name]
Set horizontal and vertical motion units
[Format]
ASCII
GS
P
x
y
Hex
1D
50
x
y
Decimal
29
80
x
y
[Range]
0
≤
x
≤
255
0
≤
y
≤
255
[Description] Sets the horizontal and vertical motion units to 1/x inch and 1/y inch,
respectively.
When x and u are set to 0, the default setting of each value is used. (
x =
180,
y = 360)
[Details]
·The horizontal direction is perpendicular to the paper feed direction and
the vertical direction is the paper feed direction.
·In standard mode, the following commands use x or y, regardless
character rotation (upside-down or 90
°
clockwise rotation):
① Command using x : ESC SP, ESC $, ESC ＼, FS S, GS L, GS W
② Command using y : ESC 3, ESC J, GS V
·In page mad, the following command use x or y, depending on character