TITLE : RP-300/310
Page -52 -
ESC c 5 n
[Name]
Enable / disable panel buttons
[Format]
ASCII
ESC
c
5
n
Hex
1B
63
35
n
Decimal 27
99
53
n
[Range]
0≤
n ≤ 255
[Description]
Enables or disables the panel buttons.
·When the LSB of n is 0, the panel buttons are enabled.
·When the LSB of n is 1, the panel buttons are disabled.
[Details]
·Only the lowest bit of n is valid.
·When the panel buttons are disabled, none of them are usable when the
printer cover is closed.
·In this printer, the panel buttons are the FEED button.
·In the macro ready mode, the FEED button are enabled regardless of the
settings of this command; however, the paper cannot be fed by using
these buttons.
[Default]
n = 0
ESC d
n
[Name]
Print and feed
n lines
[Format]
ASCII
ESC
d
n
Hex
1B
64
n
Decimal 27
100
n
[Range]
0≤
n ≤ 255
[Description]
Prints the data in the print buffer and feeds
n lines.
[Details] ·This command sets the print starting position to the beginning of the line
·This command does not affect the line spacing set by ESC 2 or ESC 3.
·The maximum paper feed amount is 1016 mm{40” }. If the paper feed
amount(n x line spacing) of more than 1016 mm{40” } is specified, the
printer feeds the paper only 1016 mm{40” }.
[Reference]
ESC 2, ESC 3