TITLE : RP-300/310
Page -73 -
When pitch N is specified to the movement upward (the negative
direction), use the complement of 65536.
When pitch N is specified to the movement upward:
nL
+
nH
x 256 = 65536 – N
·Any setting that exceeds the specified printing area is ignored.
·This command function as follows, depending on the print starting
position set by ESC T:
① When the starting position is set to the upper left or lower right of
the printing, the vertical motion unit (
y) is used.
② When the starting position is set to the upper right or lower left of
the printing area, the horizontal motion unit (
x) is used.
·The horizontal and vertical motion unit are specified by GS P.
·The GS P command can change the horizontal (and vertical) motion unit.
However, the value cannot be less than the minimum horizontal
movement amount, and it must be in even units of the minimum
horizontal movement amount.
[Reference]
ESC $, ESC T, ESC W, ESC ＼, GS $, GS P
GS ^
r t m
[Name]
Execute macro
[Format]
ASCII
GS
^
r
t
m
Hex
1D 5E
r
t
m
Decimal
29 94
r
t
m
[Range]
0
≤
r
≤
255
0
≤
t
≤
255
m=0,1
[Description]
Executes a macro.
·r specifies the number of times to execute the macro.
·t specifies the waiting time for executing the macro.
·m specifies macro executing mode.
When the LSB of m = 0:
The macro executes r times continuously at the interval specified by t.
When the LSB of m = 1:
After waiting for the period specified by t, the PAPER OUT LED