TITLE : RP-300/310
Page -56 -
FS p
n m
[Name]
Print NV bit image
[Format]
ASCII
FS p
n m
Hex
1C 70
n m
Decimal 28 112
n m
[Range] 1
≤
n
≤
255
0
≤
m
≤
3, 48
≤
m
≤
51
[Description] Prints a NV bit image
n using the mode specified by m.
m
Mode
Vertical Dot Density
Horizontal Dot Density
0, 48
Normal
180 dpi
180 dpi
1, 49
Double-width
180 dpi
90 dpi
2, 50
Double-height
90 dpi
180 dpi
3, 51
Quadruple
90 dpi
90 dpi
[dpi : dots per 25.4mm {1” }]
[Details]
·
n is the number of the NV bit image (defined using the FS q command).
·
m specifies the bit image mode.
·
NV bit image means a bit image which is defined in a non-volatile
memory by FS q and printed by FS p.
·This command is not effective when the specified NV bit image has not
been defined.
·In standard mode, this command is effective only when there is no data
in the print buffer.
·In page mode, the command is not effective.
·This command is not affected by print modes (emphasized, double-
strike, underline, character size, white/black reverse printing, or 90
°
rotated characters, etc.), except upside-down printing mode.
·If the printing area width set by GS L and GS W for the NV bit image is
less than one vertical line the following processing is performed only
on
the line in question. However, in NV bit image mode, one vertical line
means 1 dot in normal mode (m=0,48) and in double-height mode
(m=2,50), and it means 2 dots in double-width mode (m=1,49) and in
quadruple mode (m=3,51).