TITLE : RP-300/310
Page -44 -
ESC T
n
[Name]
Select print direction in page mode
[Format]
ASCII
ESC
T
n
Hex
1B
54
n
Decimal 27
84
n
[Range]
0≤
n ≤ 3,
48≤
n ≤ 51
[Description]
Select the print direction and starting position in page mode.
n specifies the print direction and starting position as follows:
n
Print Direction
Starting Position
0, 48
Left to right
Upper left(A in the figure)
1, 49
Bottom to top
Lower left(B in the figure)
2, 50
Right to left
Lower right(C in the figure)
3, 51
Top to bottom
Upper right(D in the figure)
[Details] ·When the command is input in standard mode, the printer executes only
internal flag operation. This command does not affect printing in
standard
mode.
·This command sets the position where data is buffered within the printing
area set by ESC W.
·Parameters for horizontal or vertical motion units
(x or y) differ as
follows, depending on the starting position of the printing area:
①If the starting position is the upper left or lower right of the printing
area, data is buffered in the direction perpendicular to the paper
feed direction:
Commands using horizontal motion units: ESC SP, ESC $, ESC＼
Commands using vertical motion units: ESC 3, ESC J, GS $, GS＼
②If the starting position is the upper right or lower left of the printing
area, data is buffered in the paper feed direction :
Commands using horizontal motion units :
ESC 3, ESC J, GS &, GS＼
Commands using vertical motion units : ESC SP, ESC $, ESC＼
[Default]
n = 0
[Reference] ESC $, ESC L, ESC W, ESC＼, GS $, GS P, GS＼
ESC V
n