TITLE : RP-300/310
Page -29 -
[Details]
·When both double-height and double-width modes are selected,
quadruple size characters are printed.
·The printer can underline all characters, but can not underline the space
set by HT or 90
°
clockwise rotated characters.
·The thickness of the underline is selected by ESC-, regardless of the
character size.
·When some characters in a line are double or more height, all the
characters on the line are aligned at the baseline.
·ESC E Can also turn on or off emphasized mode. However, the setting of
the last received command is effective.
·ESC - Can also turn on or off underline mode. However, the setting of
the last received command effective.
·GS ! Can also select character size, However, the setting of the last
received command is effective.
·Emphasized mode is effective for alphanumeric and Kanji. All print
modes except emphasized mode is effective only for alphanumeric.
[Default]
n = 0
[Reference]
ESC E, ESC -, GS !
ESC $
n
L
n
H
[Name]
Set absolute print position
[Format]
ASCII
ESC
$
n
L
n
H
Hex
1B
24
n
L
n
H
Decimal 27
36
n
L
n
H
[Range]
0≤
nL≤ 255
0≤
nH≤ 255
[Description]
Sets the distance from the beginning of the line to the position at which
subsequent characters are to be printed.
[Details]
·The distance from the beginning of the line to the print position is
[(
n
L +
n
H x
256) x (vertical or horizontal motion unit)] inches.
·Settings outside the specified printable area are ignored.
·The horizontal and vertical motion units are specified by “ GS P” .
·The GS P command can change the horizontal (and vertical) motion unit.
However, the value cannot be less than the minimum horizontal
movement amount, and it must be in even units of the minimum
horizontal movement amount. In standard mode, the horizontal motion