TITLE : RP-300/310
Page -71 -
·In page mode, the printer performs only internal flag operations.
·This command does not affect printing in page mode.
·If the [left margin + printing area width] exceeds the printable area,
[printable area width - left margin] is used.
·The horizontal and vertical motion units are specified by GS P. Changing
the horizontal and vertical motion units does not affect the current left
margin.
·The horizontal motion unit (x) is used for calculating the printing area
width. The calculated result is truncated to the minimum value of the
mechanical pitch.
·If the width set for the printing area is less than the width of one
character, when the character data is developed, the following
processing is performed:
① The printing area width is extended to the right to accommodate
one character.
Printable area
Left margin Extended to right
Printing area width set by
nL
and
nH
② f the printing area width cannot be extended sufficiently, the left
margin is reduced to accommodate one character
Printable area
① Extended to right
Left margin ②Reduce left margin
③ If the printing area width cannot be extended sufficiently, the right
space is reduced.
·If the width set for the printing area is less than one line in vertical, the
following processing is performed only on the line in question when
data other than character data (e.g., bit image, user-defined bit
image) is developed:
① The printing area width is extended to the right to accommodate
one line in vertical for the bit image within the printable area.
② If the printing area width cannot be extended sufficiently, the left
margin is reduced to accommodate one line in vertical.