35
Maintenance
Care of the projector
Do not attempt to disassemble any part of the projector
contact your dealer.
Cleaning the lens
Y
●
Use a canister of compressed air to remove dust.
●
Use a lens cleaning wipe or a soft, moist cloth to clean away any dirt or smudges
on the dust-free glass.
Note
Do not spray or clean if lens is hot. Wait for projector lens to cool. Should the lens be hot
Cleaning the projector case
Before cleaning the case, please refer to
“Switch off the projector” to shutdown the projector and unplug the power cable.
●
To remove dirt or dust, wipe the case with a soft, lint-free cloth.
●
To remove stubborn dirt or stains, moisten a piece of soft cloth with water and a
neutral pH detergent and wipe.
Note
Never use wax, alcohol, benzene, thinners, or other chemical-based detergents or abrasive
solutions. These can damage the case.
Storing the projector
Follow the instructions below to store
the
●
Make sure the temperature and humidity of the storage area are within the
your dealer for details of the recommended range.
●
Retract the projector support pegs.
●
Remove the battery from the remote control.
●
Pack the projector in its original packaging or equivalent material.
T
equivalent material.
recommended range for the projector. Please refer to “Specifications” or inquire
. For servicing on repair
ou can clean the dust-free glass lens if you notice any dirt or dust on its surface.
the proper shutdown procedure described in
projector for an extended time:
ransporting the projector
It is recommended that you transport the projector within its original packaging or
cleaning a hot lens will cause the lens to crack.
