11
Key safety instructions
Design and testing of your projector has been carried out in compliance with the
latest safety standards for information technology (IT) devices. However, it is extremely
important for you to follow the instructions and product labels provided in this manual
during use to ensure user safety.
Safety Instructions
●
Please read through this manual before using the projector.
Save it for future
reference.
●
Do not look straight at the projector lens during operation.
The intense light
beam may damage your eyes.
●
●
Always open the lens shutter or remove the lens cap when the projector light
source has been switched on.
●
In some areas there may be line voltage instability. This projector is designed to
operate safely within a mains voltage between 100 to 240 volts AC, but could fail if
power cuts or surges of ±10 volts occur.
In areas where the mains voltage may
a power stabilizer, surge protector or uninterruptible power supply (UPS).
●
Do not obstruct the projection lens with any objects when the projector is switched on.
●
Place the projector on a flat, stable surface to avoid any damage.
●
Do not attempt to disassemble this projector. The projector contains high voltage
parts that may cause electrocution or death when it comes in contact with the human
body. Do not disassemble or remove any covers.
●
Do not place this projector in any of the following environments.
-
- Environments of extreme heat or cold.
- Areas that are extremely humid, dusty, or smoky may contaminate optical
components, shortening the projector's life span and darkening the image.
-
- Locations with altitudes greater than 3000 m (10000 feet).
