18
Switching input signal
The projector can be connected to multiple devices
at the same time. However, it can only display one
full screen at a time.
If you want the projector to automatically search for
Quick Auto
Search
function in the
SYSTEM
menu is switched
ON
.
You may also press the source selection button
on the remote control or search for available input
signals to manually select the desired signals.
1. Press [Source] to display the source selection
column.
2. Keep pressing the until you see the
desired signal, then press [Enter].
Once detected, the selected source information will display on the screen for a few
seconds. If there are multiple devices connected to the projector, repeat steps 1 to 2
to search for another signal.
