29
Extending lamp life
The projector lamp is a consumable ite
following settings in the OSD menu.
Setting Lamp Mode
Use the
Eco
mode to reduce system noise and power by 20%. If you select
Eco
mode, the light intensity will decrease and the projection pattern will be darker.
Setting the projector to
Eco
mode also extend the lamp life. To set
Eco
mode, go
to
Advanced
>
Lamp Settings
>
Lamp Mode
, press
Enter
to enter the lamp mode,
and then press to select
Eco
, or press
Eco Mode
on the remote control to
select.
Setting Auto Power Off
This function allows the projector to turn off automatically when no input source is
detected after the set time, to avoid unnecessary wastage of lamp life.
1. Open the OSD menu and go to the
Power Management
>
Smart Energy
menu.
2. Press
Enter
to display the
Smart Energy
page.
3. Select
Auto Power Off
and press to select the time.
4. If the pre-set time length is not suitable for your needs, select
Disable
. The
projector will not automatically shut down in a certain time period.
Setting the Sleep Timer
This function allows the projector to shut down automatically after the set time, to
avoid unnecessary wastage of lamp life.
1. Open the OSD menu and go to the
Power Management
>
Smart Energy
menu.
2. Press
Enter
to display the
Smart Energy
page.
3. Select
Sleep Timer
and press to select the time.
4. If the length of the pre-set time does not apply to your presentation, select
Disable
. The projector will not automatically shut down in a certain time period.
Set power saving
If no input source is detected after 5 minutes. The projector will reduce power
consumption to avoid unnecessary waste of lamp life. You can further decide whether
to let the projector turn off after the set time.
1. Open the OSD menu and go to the
Power Management
>
Smart Energy
menu.
Reset Lamp Timer:
Set the lamp hours to zero.
Lamp Usage Timer:
Displays the time (hours) that the lamp has been running.
m. To extend the lamp life, you can make the
