28
Hiding the image
In order to draw the audience
to hide the screen image. Press any key on the projector or remote to restore the
image. After hiding the image, the lower right corner of the screen will display the text
[Blank]
.
You can go to
Basic
>
Blank Timer
menu to set blank screen duration. Once the
blank screen countdown is complete, the image will be automatically re-displayed.
After pressing [Blank], the projector will automatically enter Power Saving mode.
Caution
Do not block the projector lens. The blocking item may be heated to the point of deformation or
Locking control keys
Locking the control buttons of the projector allows you to prevent projector settings
from being changed accidentally. Once
Panel Key Lock
has been activated, with the
exception of the Power button, none of the buttons on the Projector can be used.
1. Go to
System Settings
>
Panel Key Lock
menu.
2. Press and select
ON
.
3.
Yes
choice.
To switch off the Panel Key Lock, press and hold the button on the Projector for 3
seconds.
You may also use the remote to enter
System Settings
>
Panel Key Lock
menu,
press and select
OFF
.
Buttons on the remote control can still be used even if the Panel Key Lock function has been
switched on.
If you press the Power button to switch off the projector without switching off the Panel Key
Lock function, the projector buttons will remain locked when you switch it on the next time.
Lamp Settings
Setting the projector in ECO/Dynamic ECO/Super ECO mode reduces system noise,
power consumption and extends the lamp operation life.
Lamp mode
Normal
Eco
Dynamic Eco
Super ECO
Description
Provides full lamp brightness.
Reduces lamp power consumption by 20% and lowers brightness to
extend the lamp life and decreases the fan noise.
Reduces lamp power consumption by up to 70% depending on the
content brightness level.
Reduces lamp power consumption by 70% and lowers brightness to
extend the lamp life and decreases the fan noise.
Long-term to use super ECO mode is not recommend.
’s attention to the presenter, you may press Blank
