PBLG 52 A1
■
2
│
GB
│
IE
PETROL LEAF BLOWER PBLG 52 A1
Introduction
Congratulations on the purchase of your new appliance. You have chosen
a high-quality product. The operating instructions are a part of this product.
They contain important information about safety, usage and disposal.
Before using the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to
any future owner.
Intended use
This appliance is only suitable for blowing leaves, grass and the like off
lawns, pavements and tarmac roads. The appliance must not be used for
other purposes.
Do not make any modifications to the appliance. This can compromise the
safety.
The user, not the manufacturer, is liable for any resulting damage or injuries
of any kind. Please note that this appliance is not designed for commercial
use.
We accept no warranty liability if the appliance is used in commercial,
manual trade or industrial operations or equivalent activities.
National regulations may restrict the use of the appliance!
WARNING!
►
This appliance is not suitable for use by children.
►
Long-term exposure to noise can lead to permanent hearing damage.
Always wear approved hearing protection (ear muffs).
►
Under no circumstances may the original construction of the appli-
ance be changed without the manufacturer’s approval. Always use
original accessories. Unauthorised modifications and/or unauthorised
accessories can cause serious or even fatal injuries to the user or
others.
►
An improperly or carelessly used appliance can become dangerous
and lead to serious or even life-threatening injuries. It is very important
that you read and understand the contents of these operating instruc-
tions.
Features
1
Frame
Carrying handle
2
Carrying strap
3
Curved pipe
4
Hose clip
5
Flexible pipe (D)
6
Hose clip
7
Control pipe (C)
8
Operating lever
9
Throttle
Throttle lock
0
On/Off switch
q
Pipe extension (B)
Pipe extension (B)
w
End pipe, round (A1)
e
Attachment hole (for the carrying strap)
r
Spark plug connector
t
Choke
z
Pull start
u
Fuel tank cap
i
Fuel tank
o
Locking screw (for the air filter cover)
p
Air filter cover
a
Fuel pump (primer)
s
Fastening screw (for the operating lever)
d
Locking nut (for the operating lever)
f
End pipe, flat (A2)
g
Mixing tank
h
Spark plug wrench/philips screwdriver
j
Funnel
Package contents
1 engine unit with carrying strap
1 Headtube (C)
2 end pipes, flat, round (A2/A1)
2 pipe extensions (B)
1 curved pipe
1 flexible pipe (D)
2 hose clips
1 mixing tank
2 fastening screw
2 locking nut
1 tool
1 funnel
1 set of operating instructions
Summary of Contents for 378378 2110
Page 3: ...2 1 1 2 A A2 A1 B B C D B B A1 C D...
Page 135: ...PBLG 52 A1 132 HU...
Page 147: ...PBLG 52 A1 144 SI...