HY13-1527-M1/US
Torqmotor™ Service Procedure
TF, TG, TH and TL Series
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37745 US
18
EXPLODED VIEW
ITEM #
5 & 6
7
11
1
13
1
14
1
15 17
1
19 20 25
COMMUTATOR
MANIFOLD THRUST
INNER
THRUST
THRUST BACKUP
OUTER
DIRT & WATER BACKUP
DESCRIPTION
ASSEMBLY
(see note) BEARING BEARING WASHER(2) BEARING WASHER BEARING
SEAL
WASHER
TL-
Service Part # ME018000A1 TL015000 068024 071031
028024
069017 028515 068027
478035
029118
TL Service Parts List Chart
Chart Use Example:
TL0240US080AAAB Torqmotor™ includes part numbers listed to the right of TL (SERIES), 0240 (DISP.), US (MOUNTING/
PORTING), 08 (SHAFT), 0 (ROTATION), and AAAB (OPTION) shown in the left hand column of the chart.
Caution:
The charted component service information is for the Torqmotors listed only. Refer to the original equipment manufacturer of
the equipment using the Torqmotor for assembly numbers not listed below.
EXPLODED VIEW
2
(SELECT ITEM # BOLT PER OPTION GROUP)
ITEM #
1, 1B or 1C
8A
10
9
DISPLACEMENT
ROTOR
ROTOR
DRIVE DRIVE
LINK WEAR
(in
3
/rev)
BOLT (7)
THICKNESS
SET
LINK
“LENGTH”
PLATE
0140- 8.6
021271 021387 --------
.6271
TL097003
TL123001
3.414 477014
0195- 12.0
021326 021379 --------
.8768
TL127003
TL123001
3.414 477342
0240- 14.5
021390 021291 021387
1.0643
TL157003
TL153001
3.597 477342
0280- 17.1
021352 021476 021271
1.2518
TL187003
TL183001
3.760 477342
0310- 18.9
021272 -------- --------
1.3738
TL197003
TL193001
3.887 477342
0360- 22.2
021340 -------- --------
1.6238
TL237003
TL233001
4.140 477342
EXPLODED VIEW
ITEM #
1
18 2
DESCRIPTION
SERVICE
REAR
MOUNTING
8
PORTING
HOUSING ASS’Y
COVER
US- Wheel Mt. (4 Bolt)
7/8” O-Ring
TL012000A1
ME016000
LS- Wheel Mt. Front Brake Nose
7/8” O-Ring
TL012001A1
ME016000
UB- Wheel Mt. (4 Bolt)
7/8” Rear Radial
TL012002A1
ME016002
Mounting Code Porting Code
EXPLODED VIEW
ITEM #
12
12A
12B
12C
12D
12E
12F
COUPLING
5/8-18 LOCK RETAINING
DESCRIPTION
SHAFT
KEY
NUT WASHER BOLT WASHER RING
08- 1.25” Tapered Shaft
TL019000 038016*(5/16 x 1.00)
3
025126 028413 021482 028992 401333
03- 1.25” Str. Keyed 5/8-18 Int. Thd.
TL019003
Shaft seal #16, can be replaced without replacing back up ring, #17, or backup washer, #25. Inspect items #17 and #25 to be sure wear or corrosion has not affected
these parts. If not, remove the old shaft seal, noting position and direction of seal lip. To replace the new shaft seal, use only fingers (tools not required) and replace the
seal from the rear of the motor.
If corrosion or wear is a problem and item #17 and #25 must be replaced, the factory recommends replacing the entire housing assembly (TL012xxx0A1).
For reverse timed manifold, use TL015001.
1
Service housing assembly ITEM #18 with part number suffix-A1 includes ITEM #13, #14 , #14, #16, #17, #18, #19, #20 & #25.
2
Select the required bolt number in designated “DISPLACEMENT GROUP” under bolt ITEM #1, 1A, 1B or 1C shown in designated “OPTION GROUP.”
3
1-20 UNEF slotted nut #025113 is required on 1-1/4” tapered shaft if the designated “OPTION GROUP” is AAAF, AAAN, or AAAU.
Standard seal kit #SK000212 includes six #032819 seal rings (buna), #032439 High Temp commutator seal, #032818 inner seal fluorocarbon and #478035 dirt & water
seal, 406018 grease pack and bulletin #050073.
Shaft nuts are zinc dichromate.
EXPLODED VIEW
ITEM #
2
1, 1A, 1B, 1C
2
3
4
16
END COMMUTATOR
SEAL
INNER
DESCRIPTION
BOLT (7)
COVER
SEAL
RING (5)
SEAL
AAWM Black Paint
Item #1
TL016000 032439
032819
032818
AAWL No Paint
Item #1
TL016000 032439
032819
032818
OPTION GROUP
