Parker FL20-S Series, Manual

Page: 175 / 347

FL20-S Series
175
0º and 360º
is the same
2. The data of 0°and 360°is different;
0º and 360º
is different
● Gear #2
Description:

Gear #2
：
the module which is used to set the relation of slave axis and pulse command;
Function
Set the relation between slave axis and pulse command
The slave axis operates a cycle, but the pulse command might not operate a
cycle, which can be set by users
Description

The slave axis is a virtual axis and the unit of slave position is the unit of
user

The pulse command is the encoder unit; the resolution is
131072pulse/rev.

Rotating for one cycle of chart, the slave axis operates a cycle
Setting Mode

If the pulse number of slave axis is L, the motor axis operates R cycle,
then the setting of gear ratio is:
Po304/Po305=131072*R/L
；
Po344/Po346=131072*R/L
；