Paradyne FrameSaver NP 110, User Manual

Page: 173 / 175

Appendix
A-16 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B
November 2000
Dsx Pyld Dsx Operator initiated Full T1 Payload loopback in place toward the DSX Circuit.
Dsx QRSS Dsx Operator initiated Full T1 QRSS pattern BERT is being sent toward the DSX Circuit.
Dsx 2047 Dsx Operator initiated 2047 pattern BERT is being sent toward the DSX Circuit.
Drop Loop Netw Operator initiated Loopback is in place at the Drop Port toward the Network Circuit.
Drop 2047 Netw Operator initiated 2047 pattern BERT is being sent toward the Network Circuit (for
DS0s assigned to Drop Port).
Drop Zero Netw Operator initiated All Zeros pattern BERT is being sent toward the Network Circuit
(for DS0s assigned to Drop Port).
Drop Loop Drop Operator initiated Loopback is in place at the Drop Port toward the Drop Circuit.
Drop 2047 Drop Operator initiated 2047 pattern BERT is being sent toward the Drop Circuit.
Netw Set User Loopback is in place at the User Port toward the Network Circuit, in response to a V.54
LoopUp code from the Network (only if DS0s are assigned to the User Port.)
Netw Set Drop Loopback is in place at the Drop Port toward the Network Circuit, in response to a V.54
LoopUp code from the Network (only if DS0s are assigned to the Drop Port.)
Lcl Lp Set User Loopback is in place at the User Port toward the User Circuit, in response to an LL
(Local Loopback) signal at the User Port interface (only if DS0s are assigned to the
User Port.)
Lcl Lp Set Drop Loopback is in place at the Drop Port toward the Drop Circuit, in response to an LL
(Local Loopback) signal at the Drop Port interface (only if DS0s are assigned to the
Drop Port.)
Table A-14 Test/BKP (CSU)
Display Description