Paradyne FrameSaver NP 110, User Manual

Page: 63 / 175

4 Operation
4-22 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B
November 2000
Protocol Monitor
Configuration
The Protocol Monitor Configuration Screen allows you to view and alter parameters
for Protocol Monitor and Top IP Traffic collection operations.
The Protocol Monitor Configuration Screen is shown in Figure 4-9.
Figure 4-9 Protocol Monitor Configuration Screen
1. Percentage of Protocol Monitoring Resources Required - Displays the
percentage of sorting logic needed to support the currently displayed Protocol
selections.
2. Protocols - Selects up to seven protocols to be monitored, from the protocol list
displayed. All protocols to be monitored must be entered with a single command.
Can be selected individually, in a range, or group. Selected items are bracketed by
“>>”.....“<<” characters as shown in item #1 on the example screen above. Enter
“P=” followed by nothing or a space to deselect all (factory default). Parenthesis
indicate the subset under which a protocol is grouped, such as SNAP (Refer to
“Encapsulation” on page 4-10 in this manual for details).
NOTE: Additional protocols will not be added if the current value for Percentage of
Sorting Resources Required exceeds 100%. The command will be rejected when the
“Save” command is issued, and an error message will be displayed on the screen.
************************ Protocol Monitor Configuration ************************
Name: F@43802
Percentage of Sorting Resources Required: 37.93 %
Protocols [P=] ([P=m,n,...r] and/or [P=m-n] for up to 7 selections)
>> 1) IP<< >>11) APPLETALK(SNAP)<< 21) DECNET(Raw)
2) IP/TCP >>12) DECNET(SNAP)<< 22) VINES(Raw)
3) IP/TCP/TELNET 13) VINES(SNAP) 23) XNS(Raw)
4) IP/TCP/FTP 14) XNS(SNAP) 24) IP/TCP/HTTP
5) IP/UDP 15) ISO CLNP(IETF) 25) IP/TCP/GOPHER
6) IP/UDP/SNMP 16) IP/ICMP
>> 7) IPX(SNAP)<< 17) IP/TCP/SMTP
8) IPX/SPX(SNAP) 18) IPX(Raw)
>> 9) NETBIOS(SNAP)<< 19) IPX/SPX/(Raw)
>>10) SNA(SNAP)<< 20) APPLETALK(Raw)
Top Statistics [T=] Rank Top Stats By [R=]
>>1) Conversation<< >>1) Octets<<
2) Talk/Listen 2) Packets
3) Disable
Help[?] Save[SA] Cancel[X]
>