Paradyne FrameSaver NP 110, User Manual

Page: 75 / 175

5 Diagnostics
5-8 NetPath 110 User’s Manual - Installation Guide 980-001-0240B
November 2000
Statistics
FrameSaver NP 110 provides current and historical performance statistics for the fol-
lowing:
•
CSU interface
•
CSU and Frame Relay Traffic (in summary and on a per-PVC basis)
•
PVC, Protocol, and Top IP Traffic statistics
CSU and Frame Manager statistics are accumulated in 15-minute intervals for the last
24 hours. PVC, Protocol monitoring, and Top IP Traffic statistics are accumulated in
user-defined intervals (1 - 15 minutes).
CSU/DSX
Statistics
Summary
The CSU/DSX Statistics Summary screen provides summary performance informa-
tion and access to detailed performance history displays for the CSU and DSX inter-
face.
The CSU/DSX Statistics Summary screen is accessed from the System View screen,
selecting [CS] by typing “CS” followed by ENTER.
The CSU/DSX Statistics Summary screen is shown in Figure 5-5.
Figure 5-5 CSU/DSX Statistics Summary Screen
Name - Device’s ID as defined in unit’s Device Configuration.
Mode - Selects CSU or DSX to display performance information.
NOTE: Mode field is not displayed when DSX/Drop Adapter is not installed or
when DSX Framing is set to “None.”
************************* CSU / DSX Statistics Summary *************************
Name: F@43802 Mode[M=CSU or DSX]: CSU
Netw Port Fault: Facility ID: NONAME
Active Test:
DSX Port Fault:
Current 24Hr Total
Interval Count 419 secs 96 valid
Rx Tx Rx Tx
Error Free Sec(%) 100 100 100 100
Availability(%) 100 100 100 100
Bipolar Violations 0 0
Current (1st Line) / 24 Hour Total (2nd Line)
------------- Near End ------------ -TEST/(*=Bkp)- ------------Far End----------
ES SES UAS BES CSS LOFC ES SES UAS BES CSS
600 600 600 600 600 600 / 600 600 600 600 600
65000 65000 900 900 900 900 NetwSetLine /* 65000 900 900 900 900
ResetStats[RS] ViewHistory[VH current_time(optional)]
Help[?] Close[X] AutoUpdate[AU]
>