background image

4. Using the Web Interface

4-26

 

 December 2002

2400-A2-GB20-10

Static Multicast Configuration

The Static Multicast option allows you to create or delete static Layer 2 multicast 
groups.

Figure 4-16. Static Multicast Configuration

This page allows you to create and delete static multicast groups. You create a 
new group by filling in the following fields and then clicking Apply:

To delete a group, select the group from the list box underneath the VID field. 
When you do this, the appropriate information is immediately displayed above. To 
confirm deletion of the selected group, you must click on Delete. 

Field

Description

VID

VLAN ID. This field indicates the VLAN ID for this group. It is a 
decimal number up to four digits long.

MAC Address

This field indicates the six-byte MAC Address for this group in 
hexadecimal/colon format.

Port Member Status

The remaining portion of this row allows you to set the state of a 
particular port for this group. There is a string of twelve characters 
in this field with each character representing one port on the 
switch. The first character represents port one, the second 
character represents port two, etc. The character for a specific port 
represents the state it is in for this group. By clicking on the 
character for a specific port, you can toggle the state for that port. 
The following states are defined:

!

–: Not included in group

!

M: Member

!

F: Forbidden

Summary of Contents for BitStorm 2400



























































































Reviews: