4. Using the Web Interface
4-12
December 2002
2400-A2-GB20-10
SNMP Targets
The Targets option gives you access to SNMP targets.
Figure 4-8.
SNMP Targets
This page allows you to view and modify SNMP Target Addresses and SNMP
Target Parameters. The page is split into two separate tables: SNMP Target
Addresses and SNMP Target Parameters.
SNMP Target Addresses Table
This table allows you to set up the target address for the trap manager that should
receive SNMP notifications. Entries in this table can be thought of as “destinations”
to which SNMP notifications will be sent under certain conditions.
Procedure
To create a new entry in the SNMP Target Addresses Table:
1. Select New from the Entry pull-down box.
2. Fill in the new information in the following fields:
Field
Description
Name
Unique string identifier.
Transport Domain
Transport type of the address, for example, a MIB OID.
Summary of Contents for BitStorm 2400
